Tutorial 3. At the first beat after the countoff, play the pads as described above. The display will show you where you are in each measure, in bars and beats. This shows the bar you’re in This show which beat you’re on m m ¶01 1 .04 DRUM-KIT:HeavyDrmKit 4. At the end of the second measure, press the Stop button. Record Stop Play Transport Lo cat e To p Scoo p Rew. F. Fwd. To Play Back a Sequence Track 1. Hold down the Record button, press the Stop button, and then release both buttons to rewind to the top of the sequence. You’ve just recorded your first track in your first sequence. Tip: The Transport buttons perform many tasks—see Chapter 6 in the ASR-X Reference Manual to learn more. 2.
Press the Play button. The track you’ve just recorded plays back—the sequence loops, playing your recording over and over (this default sequence setting can be changed; see Chapter 6 in the ASR-X Reference Manual). 3. Press the Stop button to end playback. Undo For situations in which you’ve recorded something you’d like to get rid of, or when you’ve done something to a track that you wish you hadn’t done, the ASR-X provides a handy Undo feature. As long as you haven’t yet recorded other tracks or performed other procedures, you can undo whatever you’ve just done to a track. To Undo a Track 1. Double-click the Sequence Process button.
Select Edit Process Sequence Undo New Ta p Tempo The default name of the sequence you’ve been recording The location at which you stopped playback m n SEQ00001 1.04 The display shows: The No/Yes LEDs flash to indicate that you’re being asked a question. 2. If you’d like to undo your recording and try again, press the Yes button and repeat the steps in “To Record a Sequence Track” above. Press the No button if you're satisfied with your performance. Undo track 1? 8 ENSONIQ ASR-X User’s Guide