EPSON — 2.4 Remote Control Operation

2.4 Remote Control Operation 51 The remote control lets you control the projector from almost anywhere in the room. Make sure that you aim the remote control at the projector's receivers within the distance and angles listed here. 30m 15m 30m 15m 15m 15m 30m 30m 20m 25° 20° 30m 20° 20m Depending on your installation environment, the available distance and angles may be shortened. Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands. If you are not going to use the remote control for a long time, remove the batteries.

When you use multiple projectors in the same room or when there are obstacles around the remote receiver, connect the remote control to the projector using a commercially available 3.5 mm stereo mini-jack audio cable. When the remote control is connected, the remote receiver on the projector is disabled. Rev.A