EPSON — 2.6 Curved Surface Correction Range for Camera Assist

2.6 Curved Surface Correction Range for Camera Assist 57 You can correct the image shape if the curved surface is a part of an exact circle. The values in the table are the minimum values for R/L shown in the illustration. They are determined in the following conditions: Projecting at maximum zoom R is 280 cm or more Projecting a 150 inch image per one projector You may not be able to correct the image shape if the value is lower than the R/L value in the table. You can confirm the maximum projection distance (L) using the following formula. L = R/value in the table Rev.A