DS-40 User’s Guide Software Information B Select your scanner from the Select Scanner drop-down list. C If you want to use the product using a wireless connection, select Network and then Add; if you want to use the product using a USB connection, select Local. If you are using a USB connection, skip step 4 and go to step 5. D In the Add window, choose the product’s IP address under Search for addresses. Then click OK .’ Note: You can add the product’s IP address manually. Select Enter address , type in the address, and then click OK . E In the Epson Scan Settings window, click Test to check the connection. If everything works properly, you see a successful connection message appears.
F Click OK to save the settings. EpsonNet Config This software allows advanced users to configure the network interface of the Epson product and use it on the network. 32