Connector Ports * Location of the connection ports on the projector *1 Only analog RGB signals can be output from the BNC port and the Computer port. *2 USB 2.0 is supported. We cannot guarantee that all USB devices will operate correctly. *3 Use to copy menu settings using the batch setup function. *4 HDCP 2.2 is supported. *5 Make sure you use LAN cables that are straight STP cables, category 6 or higher, and recommended by the HDBaseT Alliance. *6 Maximum of 900 mA when power is being supplied. Connect to this port when connecting the optional wireless LAN unit. Connect to this port to save the projector's operation logs to a USB flash drive. 13 No. Name No.
Name A BNC input port (5BNC) I Service port (USB Type-B)*2,*3 B Computer input port (Mini D-Sub15-pin) J HDMI in put port (HDMI HDCP)*4 C Monitor Out port (Mini D-Sub15-pin)*1 K Cable h older D Cable holder L DVI-D i nput port (DVI-D 24-pin) E RS-232C port (Mini D-Sub 9-pin) M HDBase T port (HDBaseT RJ45)*4,*5 F Remote port (stereo mini) N LAN po rt (RJ45: 100Base-TX) G 3G/HD/SD SDI input port (BNC) O USB- A port (USB Type-A)*2,*3,*6 H Monitor out SDI output port (BNC)