Image Quality Maintenance Clearing Afterimages (Refresh Mode) If you project still images for an extended period of time, an afterimage may remain in the projected image. Use the Refresh Mode feature to clear it. To use the effect functions, make sure you perform Refresh Mode regularly. To perform Refresh Mode, select [Refresh Mode] from the projector's [Reset] menu. After performing Refresh Mode, the power turns off after a set time has passed. If the afterimage remains after performing Refresh Mode, contact Epson for help. Adjusting Color Balance (Light Source Calibration) Performing light source calibration corrects the color balance of the light source.
We recommend running this function periodically. You can perform and make settings for light source calibration from [Light Source Calibration] in the projector's [Reset] menu. Select one of the following options. [Run Now] Starts light source calibration immediately. You may not be able to start the calibration in the following situations. - Within 30 minutes of turning on the projector. - When the environmental temperature is high and the brightness of the light source is automatically reduced. [Run Periodically] When [On] is set, every time the usage time reaches 100 hours, calibration starts automatically for the light source.
If necessary, set to [Off] to prevent light source calibration from starting unexpectedly while projecting images. [Schedule Settings] Moves to the Schedule Settings screen. You can schedule periodic light source calibration events. We recommend setting a scheduled calibration when [Run Periodically] is set to [Off]. 25