Uncoil the battery charger cable. At the free end of this cable is a small, cylindrical plug: Insert this plug into the socket labelled “ADAPTER” on the back of the HX-20: DO NOT TURN ON THE HX-20! If you leave your HX-20 power on, your batteries will not be fully charged at the end of eight hours. The batteries in the HX-20 are now charging. Allow them to obtain a full charge for eight (8) hours. Then disconnect the battery charger from the AC outlet, and unplug it from the HX-20. Preparing use The HX-20 features a built-in microprinter which can print text and graphics. The printer mechanism and controls are located in the upper left corner of the HX-20.
the printer for paper printer printer 15