Epson L-6034VW Maintenance Guide Before Inspections 7 Warning Do not use this product if foreign substances, water, or other liquids have entered the product. Electric shock or fire could occur. Turn OFF the breakers in the right-hand side of the main unit, the corona treater, and the additional UV lamp curing unit, and then contact service support. Caution Before using the additional UV lamp curing unit, make sure there are no foreign substances such as scraps of paper or dust at the irradiated part with additional UV lamp curing unit and the base of the UV unit.
If UV light is emitted while foreign substances such as scraps of paper, dust, or cleaning tools are stuck to the surface, smoke could be emitted or fire could ignite, and the substrate could catch fire. Make sure you remove any foreign substances such as scraps of paper or dust. When a paper jam occurs, make sure that no scraps of paper are left at the irradiated part with additional UV lamp curing unit and the base of the UV unit. If any scraps remain, make sure you remove them. If UV light is emitted when scraps of paper remain, fire could ignite or smoke could be emitted, and the substrate could catch fire. A smoke detector is built-into the upper section of the rewinder.
If the smoke detector turns on, immediately take appropriate safety measures. When checking the additional UV lamp curing unit, make sure you wear long sleeves and heat-resistant gloves. Since the area around the light remains extremely hot for a while after emitting UV light, burns and injuries could occur. Make sure you take sufficient safety precautions.