Epson L-6034VW Operation Guide Various Print Settings K Press Cancel Job to cancel print adjustment. This completes adjusting using print data with ruled lines. Continue to enter adjustment values and then print. L From the Preset Management menu, enter the adjustment value that you calculated into Reverse Feeding Position Adjustment for the preset for reverse feeding. M Perform printing from the print software, and then check that the print data for this print job was received on the touch panel. N Select the print job from the Job Management menu, and then press Print Settings . O Set the following, and then press OK .
P Return to the Operation Status screen, move the press switch from Standby to Ready , and then start printing. Print the first copy, and then the press automatically adjusts the sensor sensitivity. Q If the first copy pauses on the unwinder side workbench, check the print results. R On the Sensor Settings Complete screen, press Print . 131 Ruled line positions for edge of first copy and edge of second copy Adjustment value Just overlapping -0.04[mm] Edge of second copy, ruled line on the right -(L+0.04)[mm] Item Value Copies 1 Perform Eye Mark Verification Printing Select