Epson L-6034VW Operation Guide Various Print Settings Head Stitch Density Adjustment Depending on the substrate or the label design, streaks may enter the print results at regular intervals in the feeding direction. This is due to differences in the ink firing method in areas where the heads overlap and differences in density occur. a. Streak width (depending on ink color) Approx. 3 mm (C/M/Bk/Wh/Dv), approx. 1 mm (Y) You can reduce the amount of streaks by using Head Stitch Density Adjustment in the preset for printing. Note:
When you change the substrate or the print job, perform test printing to check whether or not there are streaks in the print outs, and then perform Head Stitch Density Adjustment. Making adjustments With the substrate and the preset to be used in production printing, use the Set All Colors function to adjust the density. If the streak is still noticeable after the adjustment, identify the color of the streak by using the pattern for determining the color to be adjusted, and adjust the density. A Select the preset for printing and perform test printing. B Check the print results and then change the Head Stitch Density Adjustment settings in the preset for printing that you used.
Use the Set All Colors slider to adjust the density. 159