Epson L-6034VW Operation Guide Appendix Detailed Revision List The following shows the detailed revision of the Operation Guide issued in September 2018 (CMP0133-06). 255 Outline Revision Reference Page Added an explanation about an error resulting from setting the paper core thickness incorrectly and its recovery work. U “General Notes” on page 21- "Notes on operating" U “Settings for the replacement substrate/feeding the substrate” on page 48 U “Change settings Screen” on page 126 Changed the default setting value of the corona output level. Also added reference information about the corona output level.
U “Starting up the Press and Startup Inspection” on page 26 Corrected the margin to be entered between pages when printing resumes (an amount of feeding the substrate until the feeding speed stabilizes). U “Settings for the replacement substrate/feeding the substrate” on page 48 U “Substrate Reverse Feeding Function” on page 127 U “How can I reduce waste?” on page 234 Changed description in step 8 and later in "Eye mark detection and sensor sensitivity settings during additional printing" as an Auto Center Align check box has been added to the Sensor Sensitivity Settings screen.
U “Eye mark detection and sensor sensitivity settings during additional printing” on page 55 Added explanation to step 9 about adjustment of the ion balance. U “Start Printing” on page 69 Added description to the Item and Explanation columns as Corona Treatment has been added to the Feed Subst tab in the Substrate Settings screen. U “Setting Item List” on page 86 U “Substrate Settings” on page 124 Added description to the Explanation column for Head Stitch Density Adjustment about being disabled depending on the print application software.
U “Editing Screen for Preset for Printing” on page 105 Corrected the margin to be entered when continuing print jobs from the previous day in normal printing. U “Continuing Printing Jobs from the Previous Day” on page 179 Added a description to step 4 about a possibility of increasing the margin when the Slow Feed switch is pressed to feed the substrate when continuing print jobs from the previous day in normal printing. U “When starting (normal printing)” on page 182 Added to the FAQ "When do I need to change the tension settings?" some problems requiring changing the tension value and their solutions.
U “When do I need to change the tension settings?” on page 229 Deleted from the FAQ "Printing may stop automatically" the table of "Aim to stop before the temperature of the printing area (the drum) increases". U “Printing may stop automatically” on page 234 Added "Gaps or boundary lines of another color appear between an object and its background" in the FAQ. U “Gaps or boundary lines of another color appear between an object and its background” on page 243 Deleted "Glossy effect cannot be obtained even after making the Auto Gloss Control settings" from the FAQ. -