EPSON — Starting up the Press and Startup Inspection

Epson L-6034VW Operation Guide Preparing to Print and Printing Starting up the Press and Startup Inspection To start the press, you need to perform the Startup Inspection. A Install the electrode cartridge in the corona treater. c Important: The blower built-in to the corona treater removes paper powder and dust on the surface of the substrate (dust removal). Install the electrode cartridge to perform dust removal when corona treatment is not performed. B The power breakers for the press, corona treater, and the additional UV lamp curing unit should be set to ON . Note:

If you are not using the additional UV lamp curing unit, you can continue using the press by switching the breaker for the additional UV lamp curing unit to OFF . C Move the press switch from P to Standby . The press starts and the screen is displayed on the touch panel. 26