EPSON — Starting up the Press and Startup Inspection

Epson L-6034VW Operation Guide Preparing to Print and Printing (3) Make sure the tip of the air gun is firmly inserted into the hole in the center of the axis for the unwinder axis and the rewinder axis, pump air into them, and secure the substrate. c Important: Do not supply air when no substrate is installed. Otherwise, the air chuck could be damaged. (4) Close all the open covers. E Press OK . F Check that the press and the surrounding areas are safe, and then press OK . c Important: ❏ Before starting work or printing operations, make sure there are no foreign substances, such as cleaning tools, on the substrate or the drum.

If the carriage comes in contact with any foreign substances, the carriage or the head could be damaged. ❏ Do not set the press switch to Ready until the safety check is complete. The press may not start. 28