Epson L-6034VW Operation Guide Preparing to Print and Printing I The procedure differs depending on the content settings in preset for reverse feeding. Check the following table and continue to the necessary procedure. J Press Finish without setting the items on the screen. This completes settings for substrate replacement. Go to step 17 after this step. K Select the substrate color. See the following table to select the color of the base color of the substrate or the liner color for clear film. 52 Value Explanation Reference Reverse Feeding: Do Not Apply Does not perform reverse feed of substrate after pausing and so on.
When printing resumes, a margin of approximately 8 m occurs between pages. U step 10 Reverse Feeding: Apply Eye Mark for Reverse Feeding: Do Not Use Performs reverse feed of substrate after pausing and so on, but the eye marks are not adjusted. A margin of up to 200 mm is left and printing continues. Reverse Feeding: Apply Eye Mark for Reverse Feeding: Use Performs reverse feed of substrate after pausing and so on, and the eye marks are adjusted. Set this when you need to align the substrate precisely.
U Steps 11 and on Substrate Color Example of substrate to be used White, Black, Colored White substrate Black substrate Colors except for white or black substrate Clear face + White liner Clear face + Black liner Clear face + Color liner Clear Clear face + Clear liner Single-ply clear substrate