EPSON — Eye mark detection and sensor sensitivity settings during additional printing

Epson L-6034VW Operation Guide Preparing to Print and Printing Q Check that the Feed Ready lamp on the press is on. If the lamp is off, press the Feed Ready switch to apply tension to the substrate. This completes this section. Eye mark detection and sensor sensitivity settings during additional printing The following procedure continues from step 8 in “Settings for the replacement substrate/feeding the substrate” on page 48 . A Select the substrate color for the surface on which the eye marks are arranged. See the following table to select the color of the base color of the substrate or the liner color for clear film.

55 Substrate Color Example of substrate to be used White, Black, Colored White substrate Black substrate Colors except for white or black substrate Clear face + White liner Clear face + Black liner Clear face + Color liner Clear Clear face + Clear liner Single-ply clear substrate Metallic Foil paper Metallized paper Metallized film