EPSON — Eye mark detection and sensor sensitivity settings during additional printing

Epson L-6034VW Operation Guide Preparing to Print and Printing c Important: ❏ When performing additional printing, prepare an underlying substrate having a leading margin of 22 m or longer. This is the necessary margin for the reverse feeding. a. Substrate feed direction b. Necessary leading margin = Necessary margin for the reverse feeding ❏ If the margin is less than 22 m, performing Adjust Sensor Sensitivity for eye marks will cause an error. Press Yes to feed the necessary margin for the reverse feeding automatically. Then perform Adjust Sensor Sensitivity with the eye mark at the point where printing can be started. c.

Underlying section not printed ❏ When performing additional printing, use substrate without any splices. The eye mark sensor may not recognize splices correctly. 61