EPSON — Pausing Printing

Epson L-6034VW Operation Guide Preparing to Print and Printing Note: ❏ When printing is complete, the press starts printing the next job. If you want to change to standby status, move the press switch from Ready to Standby . ❏ When print jobs are grouped ❏ Pause (After Print) is unavailable. ❏ Result Check is still available. According to the print settings for the first job in the print group, printing stops when the entire group is complete. ❏ When printing under the following conditions, the substrate passes the stop point when printing is complete, feeds backward, and then stops at the correct stop position.

❏ Using the additional UV lamp curing unit ❏ When the tension value for unwinding or rewinding is 10 N or less This completes this section. c Important: ❏ To maintain print quality, the press performs auto head maintenance at periodic intervals. You cannot change the maintenance intervals. ❏ The auto nozzle check detects nozzles that have errors, such as missing nozzles due to air bubbles after cleaning. ❏ When starting a job, we recommend performing a visual inspection of the print results to check for any clogged nozzles and so on. Pausing Printing You can use the following procedure to pause printing to check the print results during a print job. c Important:

If it is paused for too long, the loaded substrate may become unsuitable for printing such as forming creases. A Press the Pause switch. The press pauses at the end of the current page. 76