EPSON — Operation Status

Epson L-6034VW Operation Guide Touch Panel Basic Operations 90 Item Explanation Buttons Cancel Job This button is displayed when the press is in Paused sta- tus. You can use it to cancel jobs that are currently printing. Print Settings This button is displayed when the press is in Printing or Paused status. You can change settings for the print job. Reprint This button is displayed when the press is in Result Check status. You can use this to reprint completed jobs. Next Job This button is displayed when the press is in Result Check status. Confirm and proceed to the next print job. Next Job Info. Displays information for waiting jobs. Receiving Job Receiving print data.

Processing Image Print data has been received and images are being pro- cessed. Standing by Image processing for the print is complete and the print job is standing by. Preparing to print Processing the print job to allow printing to start quickly. Depending on the print job composition, you may not be able to change from Preparing to print to Print Prep. End. Print Prep. End Job processing is complete, and the press is ready to print. Job for Eye Mark Verification Printing Displayed for the print job in which eye mark verification printing is performed when starting printing. Substrate Width Displays the width of the substrate set on the Substrate Settings screen.

Used Displays the total amount of substrate fed. Press Reset to reset the feed amount to 0. Ink Levels You can see the remaining amount of ink for each ink cartridge. Displays an X mark when the amount of ink remaining drops below the minimum value. UV Light Displays whether the additional UV lamp curing unit is on or off. We recommend setting this to Off if you are not using the additional UV lamp curing unit. Ionizer Displays whether the ionizer is on or off. You can manually turn the ionizer on/off during printing.