Connect the interface cable according to the following procedure. Њ Turn off the printer, and the ECR (host computer). Ќ Plug the interface cable connector into the interface connector on the printer. Ћ Squeeze the wire clips together until they lock in place on both sides of the connector. Џ Attach the ground wire to the ground connector on the bottom of the printer. ђ Plug the drawer kick-out cable connector into the drawer kick-out connector on the printer. (When removing the drawer kick-out cable, press in on the connectors clip and pulling out.) Drawer Kick-out Connector Interface Conne Drawer Kick-out Cable 7