Network Guide Using Product via Network F For Windows 8: Select Desktop > Settings charm > Control Panel , and then select View devices and printers . For Windows 7: Click Start and then Devices and Printers . For Windows Vista: Click the Start button, and then Network . Note for Windows 8 users: Follow the steps below if you cannot find the product icon. 1. Select Add a device . 2. Select your product, and then select Next . 3. Follow the on-screen instructions. G Verify that an icon with the network product name (e.g., EPSONXXXXXX (your product name)) is added. To print using WSD, select the product by its network product name. Note:
❏ To use the scanner function with WSD, use Windows Fax and Scan or Paint in Windows Vista. ❏ The scanner name selected with Windows Fax and Scan or Paint in Windows 8/7/Vista is the same as the network product name. ❏ When using commercially available software, see the User’s Guide that came with the software for the scanning procedure. Mac OS X For Mac OS X, download the software from the Epson Web site. Note: ❏ Complete initial settings such as charging ink cartridges and setting the language before starting the network setup.
❏ Check that your network devices such as the router, wireless adapter, or hub are working properly and remove memory cards from the product before starting the computer setup. Connecting the product to a network Follow the steps below to use the product from the computer. A If you want to connect to an Ethernet network, connect the product to a hub using a LAN cable. B Download EpsonNet Setup from the following link. http://support.epson.net/setupnavi/ C Launch EpsonNet Setup. Follow the on-screen instructions to set up the product’s network connection. Note for Mac OS X 10.5.x users: Before continuing with the following steps, install your product’s printer driver from the Epson Web site.
For European users: http://www.epson.eu/Support For Asian, Oceanian users: http://support.epson.net/ 9