Network Guide Connecting the Printer to a Smart Device You can check the connection between the printer and the smart device using Epson iPrint. Related Information & “Checking the Connection Between the Printer and the Smart Device” on page 18 & “Checking the Printer's Network Connection Status” on page 53 Making a Wi-Fi Direct Connection to the Printer in Simple AP Mode (for Android Only) If you have an Android device that supports Wi-Fi Direct, you can connect the smart device to the printer in Simple AP mode by using Wi-Fi Direct mode on the Android device. Note:
❏ Depending on the Android OS version or the model, you may not be able to connect the smart device to the printer by Wi-Fi Direct. The operating procedure is also different. ❏ If you cannot connect using the following procedure, set the printer to Wi-Fi Direct mode, and then try again. 1. Install Epson iPrint on your smart device. Install Epson iPrint on your smart device from the following URL or QR code. http://ipr.to 2. Open the Wi-Fi Direct settings screen on your smart device. Select the printer's device name, and then connect using Wi-Fi Direct. 15