User’s Guide Troubleshooting for Printing ❏ Adjust the color settings in your application or in your printer driver settings. For Windows, check the Color Correction settings on the More Options tab. For Mac OS X, check the Color Options dialog box from the Print dialog box. See the online help for details. ❏ Run the Head Cleaning utility to clear any clogged ink nozzles. & “Cleaning the Print Head” on page 79 ❏ If you have just replaced an ink cartridge, make sure the date on the box. If you have not used the product for a long time, Epson recommends replacing the ink cartridges.
& “Replacing an ink cartridge” on page 71 ❏ Try to use genuine Epson ink cartridges and paper recommended by Epson. Blurry or smeared print ❏ Try to use genuine Epson ink cartridges and paper recommended by Epson. ❏ Make sure the product is on a flat, stable surface that extends beyond the base in all directions. The product will not operate properly if it is tilted. ❏ Make sure your paper is not damaged, dirty, or too old. ❏ Make sure your paper is dry and the printable side (the whiter or glossier side) is face down in the paper cassette. ❏ If the paper is curled toward the printable side, flatten it or curl it slightly in the opposite direction.
❏ Make sure the paper type selected in the printer driver is appropriate for the type of paper loaded in the product. & “Selecting Paper” on page 18 ❏ Remove each sheet from the output tray as it is printed. ❏ Do not touch or allow anything to come into contact with the printed side of paper with a shiny finish. To handle your prints, follow the instructions of the paper. ❏ Run the Head Cleaning utility. & “Cleaning the Print Head” on page 79 ❏ Run the Print Head Alignment utility. & “Aligning the Print Head” on page 80 ❏ If the paper is smeared with ink after printing, clean the interior of the product.
& “Cleaning the interior of the product” on page 85 ❏ If you are printing high-density data on plain paper using automatic 2-sided printing, lower the Print Density and choose a longer Increased Ink Drying Time in the Print Density Adjustment window (for Windows) or in the Two-sided Printing Settings (for Mac OS X) of your printer driver. & “2-sided printing” on page 45 103