User’s Guide Getting to Know Your Product Guide to the Control Panel You can press some buttons simultaneously to perform more functions. 16 Buttons/Lights F unction a G Y G T reen light (left): turns on while the printer is connected to a wireless (Wi-Fi) network. ellow light (right): turns on while the printer is connected to a wired network. reen light (left): flashes while the printer is communicating with a network. he lights flash alternately while initializing network settings. b T D in U urns the printer on or off. o not turn off while this light is flashing (such as while operating, processing data, or replacing k cartridges). nplug the power cord when this light is off.
c H W m old this button down for more than three seconds to perform Wi-Fi auto setup (AOSS/WPS). hen a network error occurs, pressing this button cancels the error. See the Network Guide for ore details. d P T rints the network status sheet allowing you to check the network settings and connection status. he PIN code for PIN Code Setup (WPS) is also printed. e P T & ress this button to load paper or a CD/DVD. urns on or flashes when paper is out or a paper jam occurs. “Error Indicators” on page 91 f O & H T pen the printer cover and press this button to replace the ink cartridge. “Replacing Ink Cartridges” on page 64 old this button down for three seconds to run print head cleaning.
urns on when the ink cartridge needs to be replaced and flashes when the ink is low. g P ress this button to stop printing and eject the paper or CD/DVD. h. T & urns on or flashes when the output tray is not ejected or the printer cover is open. “Error Indicators” on page 91 Buttons Function Enable or disable the paper size check feature before printing. While holding down the button, turn the printer off and then on again. When enabled, if the print setting differs from the paper size you loaded, the paper is ejected and printing stops. This is enabled by default. Press the and buttons simultaneously to start PIN Code Setup (WPS). See the Network Guide for more details.
Turn the printer on while holding down the button to restore the default network settings.