EPSON — Using the Print Head Alignment utility for Windows

User’s Guide Maintaining Your Product and Software B Access the Epson Printer Utility 4. & “Accessing the printer driver for Mac OS X” on page 38 C Click the Head Cleaning icon. D Follow the on-screen instructions. Using the control panel Follow the steps below to clean the print head using the product control panel. A Press the H button for 3 seconds until the P light flashes. The print head cleaning starts. When the P light changes from flashing to lit, head cleaning is complete. B When cleaning is finished, print the nozzle check pattern again. Repeat cleaning and printing the pattern until all lines are printed completely.

Aligning the Print Head If you notice a misalignment of vertical lines or horizontal banding, you may be able to solve this problem by using the Print Head Alignment utility in your printer driver or by using the product buttons. Refer to the appropriate section below. Note: Do not press y to cancel printing while printing a test pattern with the Print Head Alignment utility. Using the Print Head Alignment utility for Windows Follow the steps below to align the print head using the Print Head Alignment utility. A Make sure that no warnings or errors are displayed in the control panel and the output tray is ejected. B Make sure A4-size paper is loaded in the paper cassette 2.

C Right-click the product icon on the taskbar, then select Print Head Alignment . If the product icon does not appear, refer to the following section to add the icon. & “From the shortcut icon on the taskbar” on page 38 80