Network Guide Appendix Click Go > Application > Epson Software > EPSON Scan Settings . 3. Select the scanner you want to use from Select Scanner , and then click Network from Connection . The Add screen is displayed and the computer searches for the scanner. Note: If the Add screen is not displayed, click Add on the EPSON Scan Settings screen. 4. Click the scanner's IP address, and then click OK . c Important: You cannot search for a scanner in a different network segment over the router. Specify the address directly if it is not found. 5. Select an IP address, and then click Test . When the completion message is displayed, you have successfully connected the scanner and computer. 6.
Click OK . 100