EPSON — Adding a USB Connection to the Printer

Network Guide Connecting the Printer and a Computer 4. Select Wi-Fi Network Connection on the Connection Type screen. 5. Follow the on-screen instructions. Changing the Printer Connection to Ethernet Follow the steps below to change the connection from Wi-Fi or Ad Hoc mode to Ethernet. The following is an example of when you are using EpsonNet Print. Note: If you are using a Standard TCP/IP port or other ports, reset the port after changing the connection. 1. Connect the printer to a hub using an Ethernet cable. 2. Disable the Wi-Fi from the printer's control panel. 3. Disable the computer's Wi-Fi connection.

Related Information & “Disabling Wi-Fi from the Printer's Control Panel” on page 67 & “Ports and Protocols” on page 93 Adding a USB Connection to the Printer You can connect the printer and a computer with a USB cable when the printer is connected to Ethernet or Wi-Fi. You can add a USB connection even when the printer is on a network. 41