EPSON — Simple AP Mode

Network Guide Making Wi-Fi Network Settings from the Printer's Control Panel 6. Press Proceed . Setup is complete when the setup completion message is displayed. Note: If connection fails, restart the access point, move it closer to the printer, and try again. If it still does not work, print a connection report and check the solution. To connect a smart device, use Epson iPrint to configure the printer. To connect a computer, make connection settings for adding a computer.

Related Information & “Messages and Solutions on the Network Connection Report” on page 77 & “Preparing an Application and Wi-Fi Connection from a Smart Device” on page 11 & “Adding Computers” on page 44 Simple AP Mode This method allows you to connect the printer directly to devices without an access point. The printer acts as an access point. 1. Press Network on the home screen. 59