Network Guide Advanced Network Settings Advanced Network Settings Setting Up from the Printer's Control Panel You can change the network printer name, TCP/IP setup, DNS server and so on. Check your network environment before making changes. 1. Press Setup on the home screen. 2. Select Network Settings > Manual Network Setup . 3. Enter the printer name, and then press Done . You can enter the following characters. ❏ Character limits: 2 to 15 (you must enter at least 2 characters) ❏ Usable characters: A to Z, a to z, 0 to 9, -. ❏ Characters you cannot use at the top: 0 to 9. ❏ Characters you cannot use at the bottom: - Note:
If you press Done without entering the printer name, the default printer name (EPSON and the last six digits of the printer's MAC address) are set. 4. Select the method for acquiring the IP address (TCP/IP Setup). ❏ Auto Select when you are using an access point at home or you are allowing the IP address to be acquired automatically by DHCP. ❏ Manual Select when you do not want the printer's IP address to be changed. Enter the IP address, subnet mask, default gateway, primary DNS server, and secondary DNS server according to your network environment. Press Done , and go to step 6. 65