EPSON — Disabling Wi-Fi from Web Config

Network Guide Disconnecting or Initializing the Network Disconnecting or Initializing the Network Disabling Wi-Fi from the Printer's Control Panel When Wi-Fi is disabled, the Wi-Fi connection is disconnected. 1. Press the Setup on the home screen. 2. Select Network Settings > Wi-Fi Setup > Disable Wi-Fi . 3. Check the message, and then select Yes . Disconnecting Wi-Fi Direct from the Printer's Control Panel Note: ❏ When Simple AP mode is disabled, all devices connected to the printer in Simple AP mode are disconnected. If you want to disconnect a specific device, disconnect from the device instead of the printer.

❏ If you disconnect Wi-Fi Direct mode from the printer or from a device, the network is returned to its original setup. 1. Press the Setup on the home screen. 2. Select Network Settings > Wi-Fi Setup > Wi-Fi Direct Setup > Disconnect . 3. Check the message, and then select Yes . Initializing the Network Settings from the Printer's Control Panel You can restore all network settings to their defaults. 1. Press Setup on the home screen. 2. Select Restore Default Settings > Network Settings . 3. Check the message, and then select Yes . Disabling Wi-Fi from Web Config To use Web Config, printers and devices must have an IP address and be connected to the same network. 67