Network Guide Solving Problems ❏ If you cannot connect to the printer from a smart device using Wi-Fi Direct mode even if the Wi-Fi connection status is [Invited], the device may have been registered as a rejected device on the printer. Reset the registered information from Delete Registered Device in Wi-Fi Setup . This function deletes all registered device information. Related Information & “Simple AP Mode” on page 59 D: Cannot Connect to the Internet from a Computer ❏ Restart the access point (consider other users who may be using the network). ❏ Check the status of the access point to make sure it is working correctly. See the documentation provided with the access point for details.
❏ If the computer cannot receive signals from the access point, move them closer together. If interference occurs, move them away from other electromagnetic wave equipment or radio equipment. ❏ You may not be able to connect to a network that is receiving connections from too many devices. Reduce the number of devices on the network by turning off the unused devices and so on. ❏ If there is an IP address conflict, the network connection may become unstable or unavailable. Assign a unique IP address to each network device. ❏ You cannot connect to the network if multiple network adapters are enabled. Disable unused network adapters.
❏ If wireless channels between the computer and the access point do not match, they cannot connect to each other. ❏ Available wireless channels may be restricted on computers that have a Wi-Fi adapter. Check that the computer has the wireless channel that is set on the access point. ❏ If the access point is set to hide the SSID, enter the SSID and password directly. ❏ For Windows, you may not be able to connect to the network when a network bridge is created. Delete the network bridge. ❏ If you have connected a Windows computer to the Internet using a USB type mobile data communication device, the Internet connection may be disabled when you connect to the printer in Simple AP mode.
Set the network priorities to increase the priority setting for mobile data communication. Related Information & “Advanced Network Settings” on page 65 & “Setting Up Manually” on page 50 & “Setting the Network Priority - Windows” on page 71 Setting the Network Priority - Windows When connecting a computer to the printer by Wi-Fi Direct (Simple AP mode) while using the Internet over low- speed mobile data communication, you may not be able to access the Internet because the printer has a priority connection. Follow the steps below to lower the priority for Simple AP mode and increase the priority for mobile data communication. 1. Display the Windows network connection screen.
❏ Windows 8.1/Windows 8 71