Network Guide Solving Problems Related Information & “Checking the Connection Using a Ping Command - Mac OS X” on page 82 E: Cannot Print or Scan by Wi-Fi from a Computer Cannot Print ❏ Check if the printer is turned off. If you have set the power off timer on the printer, the printer turns off automatically after a certain period of time. ❏ Check that the access point's access light is flashing. ❏ Use a Ping command to make sure the printer and computer are connected. ❏ If the printer port is wrong, you cannot print or printing might stop. Check that print port is set up and selected correctly. ❏ Check if the network environment has been changed.
If you change the access point, make network setting again and connect the computer and printer to the same network. ❏ You can check the network that the printer is connected from [SSID] column of a network status sheet. ❏ If the printer is not displayed on the add printer screen when using Mac OS X and using both Ethernet and Wi- Fi networks, the network priority between the printer and the device may be low. Increase the network priority. ❏ If the printer is not displayed on the add printer screen when using Mac OS X and using Wi-Fi networks, the network priority between the printer and the device may be low. Increase the network priority.
Related Information & “Checking the Connection Using a Ping Command - Windows” on page 81 & “Checking the Connection Using a Ping Command - Mac OS X” on page 82 & “Checking the Print Port” on page 98 & “Setting the Network Priority - Mac OS X” on page 73 Cannot Scan ❏ EPSON Scan may not be able to communicate with a computer that has multiple interfaces. If you want to use the scanner, disable all other interfaces except for the scanner. 75 Service name Light color Descriptions Wi-Fi (or AirPort) Green The computer is connected to a network device by Wi-Fi. Red or orange The computer's Wi-Fi adapter is recognized, but it is not working correctly.
Ethernet (or built-in Ethernet) Green The computer is connected to the network device by Ethernet. Red The computer's Ethernet adapter is recognized, but it is not working correctly. Nothing – The network adapter cannot be recognized. Connect the computer and the printer directly using a USB cable, or make connection settings after preparing the required devices for network connection.