Command List of the Alphabetical Order 1 "Priority" indicates the function is executed with priority. ESC/Label Command List Rev. C SHEET17 CW-C4000 series Command Function identifier Command name Description Classification Command code Description of parameters Definition range for ESC/Label Definition range Factory-set initial value Corresponding ZPL II command Priority 1 ~H(C MV Send nozzle self-test setting Sends nozzle self-test operation settings (cleaning after self-test, permitted clogged nozzle number, self- test interval in printing (number of labels), operation at clogged nozzle detection, or enable/disable nozzle self- test). Printer setting ~H(CMV,b b=A:
Cleaning after self-test None None High b=C: Permitted clogged nozzle number None None b=I: Self-test interval in printing (number of labels) None None b=O: Operation at clogged nozzle detection None None b=S: Enable/disable nozzle self-test None None ~H(C PC Send image correction settings Sends correction settings for image to be printed (saturation, type of color correction, ink profile level correction value, tone (yellow), tone (magenta), tone (cyan), contrast, ratio of black to composite, print quality, or brightness). Printer setting ~H(CPC,b b=A: Saturation None None High b=C: Type of color correction None None b=D: Ink profile level correction value None None b=L:
Tone (yellow) None None b=M: Tone (magenta) None None b=N: Tone (cyan) None None b=O: Contrast None None b=P: Ratio of black to composite None None b=Q: Print quality None None b=R: Brightness None None ~H(C UB Send buzzer setting Sends the buzzer settings for printing operations, or the volume level. Printer setting ~H(CUB,b b=E: Enable/disable buzzer sound after error None None High b=F: Enable/disable continuous buzzer sound after error None None b=S: Buzzer timing None None b=Z: Buzzer volume None None ~H(C UI Send enable/disable buttons Sends enable/disable buttons. Control panel ~H(CUI,b b=B: Enable/disable cancel button None None High b=C: Enable/disable cut button None None b=F:
Enable/disable feed button None None b=P: Enable/disable pause button None None ~H(C UL Send panel settings Sends panel language Control panel ~H(CUL,b b=L: Panel language None None High ~H(C WR Send error reprinting setting Sends the setting for the function to reprint label printing that was stopped due to an error mid-printing. Configuration ~H(CWR,b b=P: Set/cancel error reprinting function None None High ^H(E Echo back The character string specified by a parameter is returned. Status ^H(Ea a: Echo character string 0- to 18-character ASCII string 0- to 18-character ASCII string Low ~H(I MF Send firmware version Sends the firmware version. Status ~H(IMF,b b=V:
Firmware version None None High ~H(I MM Send model information Sends the model information. Status ~H(IMM,b b=I: Ink model None None High ~H(I MP Send printer individual information Sends the printer individual information. Status ~H(IMP,b b=S: Serial number None None High