ESC/Label Command Reference Guide Rev. L Page 218 MN Enable/disable nozzle clogging recovery S = Enable/disable nozzle clogging recovery E/D E: Enabled D: Disabled None MP Print operation mode M = Print operation mode T/P/R/A/C/D/F/L/U/K T: No cutting P: Manual peeling and application R: Rewind A: Automatic peeling and application C: Cutting performed D/F/L/U/K:
Reserved ^MM S = Print speed 1/2/3/4/5/6/8/9/10/11/12/13/14 1 = 25.4 [mm/sec] 2 = 50.8 [mm/sec] 3 = 76.2 [mm/sec] 4 = 101.6 [mm/sec] 5 = 127 [mm/sec] 6 = 152.4 [mm/sec] 8 = 203.2 [mm/sec] 9 = 220.5 [mm/sec] 10 = 245 [mm/sec] 11 = 269.5 [mm/sec] 12 = 304.8 [mm/sec] 13 = 330.2 [mm/sec] 14 = 355.6 [mm/sec] None F = Flush onto paper mode 1/2 1: Min. dot 2: Max. dot None U = Basic printer unit system D/I/M D: Dots I: Inches M: Millimeters ^MU