2.4.5 Print Area and Margin Settings Within the printable area, the area minus margins is defined as the print area. The size of margins is set in the printer according to printer and paper specifications. If all margins are set to 0, the printable area and print area will be the same. Table 2.4.4 Margin Settings № The unit of the setting value can be selected from dot/mm/inch by ^S(CMP,U or ^MU command. Figure 2.4.6 Printable Area and Mount Settings ESC/Label Command Reference Guide Rev.
L Page 30 Direction Setting items Setting command format X direction Left margin ^S(CLW,L,c ¹ Right margin ^S(CLW,R,c ¹ Y direction Top margin ^S(CLW,T,c ¹ Bottom margin ^S(CLW,B,c ¹ Paper Printable area Top m argin n margin Print area Left margin Righ t margi n Bottom margi Bottom margi n