[Function] Sets the GS1 DataBar, UPC, EAN barcode, or UCC/EAN Composite symbol for the current field. Sets the field orientation based on Parameter a. Sets the symbol type of barcode or symbol based on Parameter b. Sets the magnification factor of barcode or symbol based on Parameter c. Sets the height of separator based on Parameter d. Sets the height of barcode part of UCC/EAN-128 and CC-A/CC-B/CC-C based on Parameter e. Sets the number of segments per line in GS1 DataBar Expanded based on Parameter f. Sets the addition of HRI (Human Readable Interpretation) character based on Parameter g.
When the addition of HRI character is specified, HRI character is added under the barcode. Settings made with this command are enabled only in the current field. Settings are discarded after processing for the current field is complete. Methods for specifying attributes for encoding are shown below. Use “^FD” (field data) to specify the data for encoding. You can specify attributes for encoding by specifying particular characters in the data. The method for specifying attributes for encoding is the same for both this command and “^BR”(GS1 DataBar). [Initial value] None [Response] None [Reference] Related function specifications: None Related commands:
None ESC/Label Command Reference Guide Rev. L Page 50