^B2 [Name] Interleaved 2 of 5 barcode [Format] ^B2 o ,h ,i ,a ,c [Function] Sets Interleaved 2 of 5 barcode to the field. Sets the field orientation based on Parameter o. Sets the barcode height based on Parameter h. Sets the HRI character printing based on Parameter i. Sets whether to position the added HRI characters on the top or on the bottom of the barcode based on Parameter a. Sets the check digit printing based on Parameter c. The ratio for the widths of the thick and thin bars in Interleaved 2 of 5 rendering processing follows the setting of “^BY”. [Encoding] Numerals (0 to 9) can be encoded.
If the width of the barcode to be rendered exceeds the label width, only the part that fits in the label width will be printed. If the number of characters in the specified character string is odd, a zero is added to the front of the character string to make it even. [Response] None [Reference] Related commands: ^FW , ^BY ESC/Label Command Reference Guide Rev. L Page 54 Parameters Description Definition range o Interleaved 2 of 5 field orientation o = N/R/I/B N: Normal R: 90° rotation (clockwise) I: 180° rotation B:
270° rotation (clockwise) h Interleaved 2 of 5 barcode height [dot] 1 ≤ h ≤ 32000 (Varies depending on the model) i Set/cancel of HRI character addition for Interleaved 2 of 5 i = Y/N Y: Set N: Cancel a Set/cancel of HRI character addition for top of Interleaved 2 of 5 barcode a = Y/N Y: Set N: Cancel c Set/cancel check digit printing for Interleaved 2 of 5 c = Y/N Y: Set N: Cancel