^BC [Name] Code 128 barcode [Format] ^BC o ,h ,i ,a ,c ,m [Function] Sets Code 128 barcode to the field. Sets the field orientation based on Parameter o. Sets the barcode height based on Parameter h. Sets the HRI character printing based on Parameter i. Sets whether to position the added HRI characters on the top or on the bottom of the barcode based on Parameter a. Sets the automatic addition of the Mod10 check digit based on Parameter c. The check digit calculated by modulus 103 is automatically added regardless of this setting. Sets the barcode mode based on Parameter m. ESC/Label Command Reference Guide Rev.
L Page 64 Parameters Description Definition range o Code 128 field orientation o = N/R/I/B N: Normal R: 90° rotation (clockwise) I: 180° rotation B: 270° rotation (clockwise) h Code 128 barcode height [dot] 1 ≤ h ≤ 32000 (Varies depending on the model) i Set/cancel of HRI character addition for Code 128 i = Y/N Y: Set N: Cancel a Set/cancel of HRI character addition for top of Code 128 barcode a = Y/N Y: Set N: Cancel c Addition of a Mod10 check digit for Code 128 c = Y/N Y: Yes N: No m Code 128 mode m = N/U/A/D N: Normal U: UCC Case A: Automatic D: UCC/EAN