^BE [Name] EAN-13 barcode [Format] ^BE o ,h ,i ,a [Function] Sets EAN-13 barcode to the field. Sets the field orientation based on Parameter o. Sets the barcode height based on Parameter h. Sets the HRI character printing based on Parameter i. Sets whether to position the added HRI characters on the top or on the bottom of the barcode based on Parameter a. [Encoding] Numerals (0 to 9) can be encoded. 12 characters can be encoded. The check digit is added automatically during encoding for the specified field data. The check digit is calculated by modulus 10 / 3 weight. [Response] None [Reference] Related commands: ^FW , ^BY ESC/Label Command Reference Guide Rev.
L Page 71 Parameters Description Definition range o EAN-13 field orientation o = N/R/I/B N: Normal R: 90° rotation (clockwise) I: 180° rotation B: 270° rotation (clockwise) h EAN-13 barcode height [dot] 1 ≤ h ≤ 32000 (Varies depending on the model) i Set/cancel of HRI character addition for EAN-13 i = Y/N Y: Set N: Cancel a Set/cancel of HRI character addition for top of EAN-13 barcode a = Y/N Y: Set N: Cancel