^BQ [Name] QR Code [Format] ^BQ o ,m ,s [Function] Sets the QR Code symbol to the field. Sets the field orientation based on Parameter o. Sets the symbol model based on Parameter m. Sets the module size for symbol rendering based on Parameter s. [Encoding] Encoding can be determined by specifying a meta character in the field data specified for the symbol data. The following table indicates the meta characters and explains each one. If B is specified for the character mode, 4 numerals are input after B in the character string to encode. ESC/Label Command Reference Guide Rev. L Page 75 Parameters Description Definition range o QR Code field orientation o = N (Fixed) N:
Normal m QR Code model m = 1/2 1: Model1 2: Model2 s QR Code module size 1 ≤ s ≤ 99 Meta character Function Description D Specifies the encode mode. D: Can specify multiple character modes within the same single field data. (Not supported in the CW series) H, Q, M, or L Specifies the error correction level. H: Data can be recovered even if up to 30[%] of the symbol area is corrupted. Q: Data can be recovered even if up to 25[%] of the symbol area is corrupted. M: Data can be recovered even if up to 15[%] of the symbol area is corrupted. L: Data can be recovered even if up to 7[%] of the symbol area is corrupted. A Automatically specifies input mode.
Automatically sets the character mode based on the input data. M Manually specifies input mode. Specifies the character mode based on the meta characters N, A, B, or K Specifies the character mode. N: Numerals are specified. A: Alphanumerics are specified. B: 8-bit Latin / kana character set (JISX0201) is specified. K: Kanji that can be specified using Shift- JIS are specified.