If 200 is specified for Parameter e, only the combination of c and r shown in the following table is valid (the combination of c and r is expressed as “r x c”). If the symbol is a square with an equal number of columns and lines, the same value for the column count and line count is set as shown below, depending on the specifications for Parameters c and r. If different values are specified, the larger value is set. If only one is specified, the specified value is set. ESC/Label Command Reference Guide Rev.
L Page 83 ECC 200 (Square) ECC 200 (Rectangle) 10 × 10 8 × 18 12 × 12 8 × 32 14 × 14 12 × 26 16 × 16 12 × 36 18 × 18 16 × 36 20 × 20 16 × 48 22 × 22 24 × 24 26 × 26 32 × 32 36 × 36 40 × 40 44 × 44 48 × 48 52 × 52 64 × 64 72 × 72 80 × 80 88 × 88 96 × 96 104 × 104 120 × 120 132 × 132 144 × 144