^CT ~CT [Name] Set prefix character for control commands [Format] ^CT p ~CT p [Function] Sets the prefix character which indicates the control command. [Response] None [Reference] Related commands: ^CC , ~CC , ^CD , ~CD , ^FH , ^FC [Note] The ^JUS command is required to save settings to the non-volatile memory of the printer unit. Please refer to the “^JU” command section for details. [Usage example] An example of sending data that sets prefix character for control commands and saves settings to the non-volatile memory of the printer unit is shown below. ^XA ^CTa 1. Sets as the prefix character for control commands. ^JUS 2. Saves the setting to non-volatile memory.
^XZ ESC/Label Command Reference Guide Rev. L Page 95 Parameters Description Definition range p Prefix character for control commands One ASCII code character excluding , , and