~DE [Name] Download a character code conversion table [Format] ~DE d: o. x ,s ,data [Function] Downloads the character code conversion table to the printer. Character code conversion table refers to a table which converts character code defined in an encoding format other than Unicode into a character code defined in Unicode. The character code conversion table is stored in the specified storage destination. If any file exists in the specified storage location, delete the existing file and create a character code conversion table file in which an additional downloaded character code conversion table is stored.
[Initial value] None [Response] None [Supplement] It corresponds to a character code conversion table in CSV format. The character code conversion table in CSV format is created by the Epson utility. [Note] Use a colon for the parameter separator character between Parameter d and Parameter o. Use a period for the parameter separator character between Parameter o and Parameter x. [Reference] Related function specifications: None Related commands: ^SE ESC/Label Command Reference Guide Rev. L Page 98 Parameters Description Definition range d Storage memory device d = R/E/B/A R: Volatile memory E: Non-volatile memory B: Optional memory A:
Optional memory o Character code conversion table file name ASCII(20H to 7EH) , 8 and less characters x Extension x = CNV s Data size (bytes) of the character code conversion table Numerical value The maximum size depends on the model. data Character code conversion table data Binary data in CSV format