EPSON — 5.1 Selecting an optimum input resolution

5 Various Printing Methods This chapter describes a variety of printing methods using settings and commands. 5.1 Selecting an optimum input resolution With the CW-C4000 series, you can set multiple print qualities. The print speed is faster with lower quality settings, and even faster printing is possible by setting a lower input resolution for the printer. However, if you lower the input resolution while using a high quality setting, the desired image quality might not be possible. In order to achieve optimum printing results, it is recommended to generate print data with an input resolution suitable for the print quality.

The recommended input resolution for each print quality setting is shown below. Printing is possible even without the recommended combination of settings. Table 5.1-1 Print quality and recommended input resolution An example using an input resolution of 600 dpi was shown in Chapter 3. The information provided here is for an input resolution of 300 dpi.  Set each resolution to 300 dpi in the print settings. Be sure to configure this setting before any other. The resolutions that must be set are the format resolution, the print resolution, and the printer resolution before replacement.  Set images that are registered in the printer to 300 dpi.

 Set the position and size for the print command to values suitable for 300 dpi. Figure 5.1-1 Command structure for an input resolution of 300 dpi Epson ESC/Label Application Development Guide CW-C4000 Series Rev. C Page 35 Print quality Recommended input resolution [dpi] Max Speed 300 Speed 600 Normal 600 Quality 600 Max Quality 600