8.2 Head cleaning Function description: This function performs head cleaning. It automatically checks for clogged nozzles and performs head cleaning. Select the cleaning type from the following. Auto/Power Cleaning Reason(s) for this function: Nozzle clogging occurs. Usage case: Use this if there are dots missing in the print data. Implementation recommendations: Notify the user that a large volume of ink will be consumed when performing power cleaning. You can display a page that instructs the user to print out the clogged nozzle check pattern after head cleaning is complete and confirming that the printer is idling. Command(s) used:
~J(C ~J(MCL 8.3 Print the clogged nozzle check pattern Function description: This function prints the pattern for checking for clogged nozzles. The user visually checks the printed check pattern to determine if any nozzles are clogged. Reason(s) for this function: This prints the nozzle check pattern to check if there are nozzles clogged. Usage case: Use this to confirm there are no nozzles clogged before printing. Implementation recommendations: This function can be used alone without head cleaning by the user. Command(s) used: ~W(PNC A UI sample for head cleaning and printing a clogged nozzle check pattern is shown below.
Figure 8.3-1 UI sample for head cleaning and printing a clogged nozzle check pattern Epson ESC/Label Application Development Guide CW-C4000 Series Rev. C Page 71