The gap-based layout is shown below. Figure 4.3.2-2 Gap-based layout Table 4.3.2-2 List of gap-based setting values Epson ESC/Label Application Development Guide CW-C6000/CW-C6500 Series Rev. J Page 21 Item 8-inch models 4-inch models Command Setting range Recommended initial value Setting range Recommended initial value Label width [mm] 21.4 to 215.9 211.9 21.4 to 112.0 108.0 ^S(CLS,P Label length [mm] No cutting 8.0 to 609.6 304.8 8.0 to 609.6 152.4 ^S(CLS,L Cut 15.0 to 609.6 304.8 15.0 to 609.6 152.4 Peel 12.7 to 609.6 304.8 12.7 to 609.6 152.4 Gap between labels [mm] 2.0 to 6.0 3.0 2.0 to 6.0 3.0 ^S(CLS,C Left gap [mm] 0.0 to 6.0 2.0 0.0 to 6.0 2.0 ^S(CLS,G