EPSON — 5.2.3 Print target

5.2 Efficiently printing multiple labels The printer renders objects such as text, barcodes, images, and graphics in each field of the rendering canvas according to the commands that are transmitted. If there are many fields on a single label, the rendering time will be longer and it will take longer for printing to start. If there are multiple labels in a single batch, there might be a wait time between printing the first and second labels, because the second and subsequent labels are rendered in the same way as the first. This chapter describes a printing method for reducing the rendering time for the second and subsequent labels, when a single batch includes multiple labels.

We recommend including this function in cases where many labels are printed at once, so that the total print time does not become longer than expected. 5.2.1 Operating principle Common fields for the first label and each subsequent label are rendered first, and they are saved as a template image. For both the first and subsequent labels, the template image that was saved is rendered first, and then only the fields that are different for each label are rendered. If there are many fields to render and there is a high ratio of common fields between multiple labels, you can expect an improvement in the rendering speed.

Figure 5.2.1-1 Operating principle Epson ESC/Label Application Development Guide CW-C8000 Series Rev. B Page 46