Print the 2nd label. [Image registration commands] ~DYR:GRIMG,B,P,192,0, .PNG... Register image that is used only for the 2nd label [Print commands] ^XA ^C(L Load rendering canvas (All fixed fields are rendered.) ^FO1500,445^A0N,105,84^FD90-22153^FS Render variable fields ^FO1500,610^IMR:GRIMG.PNG^FS ^FO1500,785^A0N,105,84^FD00000002^FS ^FO1700,1020^A0N,150,120^FD9^FS ^FO1500,1300^BY7,3^B8N,300,Y,N^FD0123456^FS ^S(CUB,S,L Set post-printing buzzer ^XZ [Printing complete commands] ^XA ^IDR:GRIMG.PNG^FS Delete image file that is used only for the 2nd label ^XZ Perform the batch complete process.
[Printing complete commands] ^XA ^IDR:*.*^FS Delete all image files that were used for printing ^XZ With these command examples, fixed images are loaded for every label format for each label, and the variable fields are rendered. These definitions can be saved in a format file, and the format file can be loaded at the beginning of a label format. In addition, if there are no variable graphics in the label format, the sequential number commands ^SN, ^SF can be used to print multiple labels. Fixed areas and variable areas can be user-defined.
However, it is possible to further improve the effect by using the printer control software to detect changes in the content of a field and then create a template image in the corresponding batch. Epson ESC/Label Application Development Guide CW-C8000 Series Rev. B Page 52