5.4.2 ICM setting The items that the user sets for ICM, and a UI sample are shown below. These settings are enabled when the color correction type is set to ICM. A list of the profiles in the setting items can be made with ICMAPI in Windows OS, described in the next section. Table 5.4.2-1 User setting items Epson ESC/Label Application Development Guide CW-C8000 Series Rev. B Page 63 Item Description Input profile List the profile of the display device. The default is sRGB IEC61966-2.1 (OS default). Intent Saturation Convert while maintaining the saturation. Perception Convert to an image that is natural in appearance. Use when the image data uses a wide range of colors.
This setting is recommended as the default. Maintain relative color gamut Convert so that the color coordinates of the original data match the color coordinates when the data is printed, and so that the color coordinates for white points (color temperature) also match. Use when there is a lot of color matching. Maintain absolute color gamut Assign absolute color coordinates to both the original data and the print data before converting. The white points (color temperature) of both the original data and the print data are not subject to color correction. Use for special uses, such as when printing logo colors. Output profile Auto select With default settings, only this option is displayed.
The printer control software automatically applies the profile provided by Epson that corresponds to the ink type, media coating type, and print speed settings currently selected by the user. The ink type can be determined using the model information request command (~H(IMM). List all profiles (Options) The profiles of all output devices (printers) installed in the computer are listed. The user can select whether to enable or disable the list in the options. It is disabled by default, and it is assumed it will be enabled when applying profiles created by the user themselves. The printer control software applies the profile selected by the user.