EPSON — 9.1 Displaying information about consumables

8.2 Head cleaning  Function description:  This function performs head cleaning.  It automatically checks for clogged nozzles and performs head cleaning.  Select the cleaning type from the following. Auto/Power Cleaning  Reason(s) for this function:  Nozzle clogging occurs.  Usage case:  Use this if there are dots missing in the print data.  Implementation recommendations:  Notify the user that a large volume of ink will be consumed when performing power cleaning.  You can display a page that instructs the user to print out the clogged nozzle check pattern after head cleaning is complete and confirming that the printer is idling.  Command(s) used:

 ~J(C ~J(MCL 8.3 Print the clogged nozzle check pattern  Function description:  This function prints the pattern for checking for clogged nozzles.  The user visually checks the printed check pattern to determine if any nozzles are clogged.  Reason(s) for this function:  This prints the nozzle check pattern to check if there are nozzles clogged.  Usage case:  Use this to confirm there are no nozzles clogged before printing.  Implementation recommendations:  This function can be used alone without head cleaning by the user.  Command(s) used:  ~W(PNC A UI sample for head cleaning and printing a clogged nozzle check pattern is shown below.

Figure 8.3-1 UI sample for head cleaning and printing a clogged nozzle check pattern Epson ESC/Label Application Development Guide CW-C8000 Series Rev. B Page 78