10.3 Receive buffer full control Description: Due to the increased amount of data for color printers, it is easy for the printer's receive buffer to become full. The printer does not receive data when the receive buffer is full. Because the printer cannot receive data when the receive buffer is full, the status cannot be acquired using the status command. The printer receives data even during an error. If the printer continues to receive data during an error, the receive buffer may become full. Recommended control:
When registering graphics in the printer, use the printer information request command (for acquiring available capacity of drive) to acquire the available capacity of the drive. If space is available for the size of the graphic to be registered, transmit the data. Use the printer information request command (information request with full buffer) to request the receive buffer full status. If the receive buffer is not full, up to 4096 bytes of data will be sent. Command(s) used: ~H(SDS,R ~H(SPB,F 10.4 Notes for when using printer information request commands Description:
If you want to request multiple statuses from the printer, you can combine printer information request commands and transmit them as one command group. Recommended usage: If using command groups, confirm the responses from all the sent commands before sending the next command group. Printer information request commands: ~H(C ~H(I ~H(Q ~H(S Epson ESC/Label Application Development Guide CW-C8000 Series Rev. B Page 83